How to Remove and Install a New HP Laptop Battery

0
652

In most cases, if your laptop battery needs a change and you don’t have the time to take it to a repair shop, you may simply do the change yourself. If you’re looking to change the battery of your hp laptop, or you really want to learn How to Perform an HP Laptop Battery Replacement this guide will walk you through the process step by step. It’s best to refer to a repair manual for the specifics, but if you know what a screwdriver is, you shouldn’t have too much trouble.

Turn off your device and remove the connection to the power

Despite its simplicity, this is a very crucial step.. It is essential that you not only turn off your laptop completely but also remove the power cord from the device. If you don’t, you run the real risk of receiving any electrocution incident and being seriously injured.

Take out the Board at the back of the laptop with a Screwdriver

The rear board of most  HP laptops must be swapped out to accommodate a new battery. As a result, you may need to take out time to buy a good screwdriver or maybe a device to open the laptop. Luckily, they do not cost much. Regardless of the price, these instruments ensure your procedure of new battery installation is a lot more straightforward.

Depending on the brand and model of your laptop, you may have to remove a rubber material from the backboard to open the battery compartment. You may use a tool used for plastic opening or a guitar pick to peel the rubber material, allowing removals of holding screws a lot easier.

Open the screws at the backboard with your screwdriver, then carefully remove the laptop’s panel at the back. A plastic tool may be required to make the edges lose.

Take out the laptop’s battery

Using the same screwdriver, remove the screws that secure your laptop’s battery to the board.  There is a material connecting the laptop battery to the device. That connector should be disconnected after the release has been made.

Because these pieces are so delicate, you might inadvertently do a lot of damage if you injure them. Also, see if you can get to your smartphone by taking out the battery.

The replacement battery should be free of all forms of plastic material before you install it. To avoid any compatibility issues, be sure that this is the exact or better battery of the laptop. Place your laptop’s battery in the designated spot and configure it properly.

Connect the new laptop battery

You may now begin the procedure of putting your newly purchased battery in place. For you to make your laptop run again after installing a new battery, you should do the opposite of what you did before.

Install the board you removed at the start

Once you’ve aligned the cover behind with the laptop itself, put it back on using your screwdriver.

Again, you must use caution to avoid damaging your gadget by bringing items too near or letting them run too freely.

So, if you follow the above instructions, you will be able to change the battery in your HP laptop. However, if you’re a novice at this, you’ll need to call a laptop repair service and chat with a professional. In terms of removing the battery from an HP laptop, they’ll always be able to assist you better.

LEAVE A REPLY

Please enter your comment!
Please enter your name here